|
Post by haerikj on Aug 27, 2015 21:22:23 GMT 1
Hello
The plates are missing. I think the interieur is original. You can see the desktop with the rooms for maps. Over the desktop there is 2 frames with holders for radio equipment. Hope to start restoring in a few years. I hope my Borgward is strong enough to tow the trailer.
Best regards Hans Erik
|
|
|
Post by haerikj on Aug 25, 2015 22:20:22 GMT 1
Hi Here is my B2 trailer. It has stood at an airport in northern Finland during the war. Used at a sawmill in northern Norway just inside the border with finnland after the war. Untouched in the forest since the 1960s. The cabin is complete, but the walls have collapsed due to heavy snow .. Missing drag, drums and wheels. Hope someone can help me with these parts? Cheers Hans Erik
|
|
|
Post by haerikj on Aug 25, 2015 21:35:36 GMT 1
Hello Here is my A2 trailer.. Have started to restore it :-) Hans Erik
|
|
|
Post by haerikj on Jul 23, 2015 22:15:03 GMT 1
Hello Thank you Scott :-) Now, my Krupp is ready for the new body. Hans Erik
|
|
|
Post by haerikj on Feb 8, 2015 15:05:10 GMT 1
New picture from the restoration.
|
|
|
Post by haerikj on Dec 30, 2014 1:11:21 GMT 1
|
|
|
Post by haerikj on Dec 22, 2014 22:21:15 GMT 1
Has made new holder for blowtorch/Lötlampe. Regards Hans Erik
|
|
|
Post by haerikj on Dec 9, 2014 22:01:58 GMT 1
Hello Is there anyone who knows what kind of vehicle these fenders have been sitting on? German halftrack or armored car? Regards Hans Erik
|
|
|
Post by haerikj on Dec 9, 2014 21:37:55 GMT 1
Does anyone know what the arrow up means?
|
|
|
Post by haerikj on Dec 9, 2014 21:31:10 GMT 1
Have made battery case.
|
|
|
Post by haerikj on Dec 9, 2014 21:28:56 GMT 1
My Krupp becomes more and more complete. Have made holders for the turn signal and mounted on fenders for adaptation to the rest of the front. Much of the power is also connected.
|
|
|
Post by haerikj on Sept 28, 2014 21:00:46 GMT 1
Hello A little update on the Krupp Protze project. Have made parts that were missing, mounted on the parts that are finished renovating and started to connect power. It goes forward piece by piece.
|
|
|
Post by haerikj on Aug 18, 2014 22:38:11 GMT 1
I am missing a Regler/regulator for my Krupp engine. Does anyone know what kind of regler/regulator I can used in my engine?
Regards Hans Erik
|
|
|
Post by haerikj on Dec 23, 2013 23:48:36 GMT 1
Hello Oldbiketech great photos of your Krupp :-) Ich kann dir nicht helfen mit einen Rahmen für den Krupp.
Regards Hans Erik
|
|
|
Post by haerikj on Nov 22, 2013 0:13:48 GMT 1
|
|