|
Post by haerikj on Nov 22, 2013 0:13:48 GMT 1
|
|
|
Post by oldbiketech on Nov 29, 2013 19:40:17 GMT 1
Super ! Die Bilder gefallen mir gut. Suche noch einen Rahmen für den Krupp. Kannst Du da weiterhelfen ? Anbei ein BIld von meinem Krupp.
Gruß Oldbiketech
|
|
|
Post by oldbiketech on Nov 29, 2013 19:44:20 GMT 1
|
|
|
Post by oldbiketech on Nov 29, 2013 19:47:51 GMT 1
Mal sauber mit Plane ... und mal nach Geländeeinsatz
|
|
|
Post by haerikj on Dec 23, 2013 23:48:36 GMT 1
Hello Oldbiketech great photos of your Krupp :-) Ich kann dir nicht helfen mit einen Rahmen für den Krupp.
Regards Hans Erik
|
|
|
Post by oldbiketech on Dec 25, 2013 19:28:05 GMT 1
Schade ! Vielleicht ergibt sich ja mal etwas. Nur wenn man sucht kann man finden. Merry Christmas
|
|
wille
Generalleutnant
Posts: 472
|
Post by wille on Dec 26, 2013 12:01:36 GMT 1
My L2H 43 Kfz69 Wilhelm
|
|
wille
Generalleutnant
Posts: 472
|
Post by wille on Dec 27, 2013 22:02:40 GMT 1
Thank you opelblitz! I got the two photo's. I can see that it is differences in the motor compartment - Hans Erik have a 1936 , and this have a lubrication chart under the hood, mine Krupp do not have this. As you see on the photos there is also other differences. I do not know the year of production on my vehicle, but the Kfz 69 body brackets fits to the frame, and the frame is the early type. My bee you or other members have knowledge to explain the differences?
Wilhelm
|
|
|
Post by haerikj on Aug 18, 2014 22:38:11 GMT 1
I am missing a Regler/regulator for my Krupp engine. Does anyone know what kind of regler/regulator I can used in my engine?
Regards Hans Erik
|
|
|
Post by eastwood on Aug 21, 2014 20:25:57 GMT 1
Very nice your Krupp !
|
|
|
Post by oldbiketech on Sept 13, 2014 8:52:34 GMT 1
Hallo Hans Erik!
Du kannst jeden Regler mit 12Volt 300W verwenden.
|
|
|
Post by haerikj on Sept 28, 2014 21:00:46 GMT 1
Hello A little update on the Krupp Protze project. Have made parts that were missing, mounted on the parts that are finished renovating and started to connect power. It goes forward piece by piece.
|
|
|
Post by haerikj on Dec 9, 2014 21:28:56 GMT 1
My Krupp becomes more and more complete. Have made holders for the turn signal and mounted on fenders for adaptation to the rest of the front. Much of the power is also connected.
|
|
|
Post by haerikj on Dec 9, 2014 21:31:10 GMT 1
Have made battery case.
|
|
|
Post by haerikj on Dec 9, 2014 21:37:55 GMT 1
Does anyone know what the arrow up means?
|
|