|
Post by Hans on Jul 26, 2011 22:09:58 GMT 1
It are for certain 1.5 tonner wheels , either for Steyr 1500 or Mercedes 1500 , or another 1,5 ton vehicle .
Its an earlier version , later more holes where cut out to save weight .
Hans.
|
|
|
Post by Hans on Mar 26, 2011 18:34:31 GMT 1
ok , will try to find it in coil then .
It should be like that , how else can you bend it by hand ?? Will let you know if i can find anything .
Hans .
|
|
|
Post by Hans on Mar 25, 2011 22:49:34 GMT 1
Hi ,
who can help me find a set of springs for the suspension for a heavy Horch typ 40 . Or does anyone know a modern replacement ?
Thanks ,Hans.
|
|
|
Post by Hans on Mar 25, 2011 22:44:28 GMT 1
Hallo Wilhelm, well 4 mm is available in steel here , not alu ( got very good aluspray paint ;D ). The 5 mm in alu will be a problem , didn't find that . Not even in steel !! But how to transport it ?? Its available in lenghts of 6 mtrs ! Can cut it , but what the longest lenght you need ? For Horch you need 8x1 for the fuelline . No , didn't use the pump , put a greasenippel on every point of the central lubricationsystem , lubricated it with graese and put the line back. Its more work , but its better lubed and you reache everything , with the central lubesystem thats is the question. You can't see where it goes until it spills, and makes a mess !! The pumps are very different now a days , so don't think anything will be available . The dividerpoints are sometimes still in the list ! Hans.
|
|
|
Post by Hans on Mar 25, 2011 18:43:42 GMT 1
Hi Wille ,
will try to do so .
Its only needed for the cross overs and for the connection pump- first devider ? The rest should be steel tube 4 mm . Willy Vogel still exists and you can order some componants still. The nuts , for the 4mm tube , however have different threads , but thoose can be machined .
Don't use the oil in the pump for my vehicles anymore, everything is attached as original , but i lubricate with graphite-grease . thats much less messy as the oil !!
Hans.
|
|
|
Post by Hans on Mar 25, 2011 11:22:09 GMT 1
Hi Wille ,
thats normal tradeware here , howmuch do you need ??
Hans.
|
|
|
Post by Hans on Jan 20, 2011 22:58:16 GMT 1
Hi Stalingrad ,
yes , it looks very much like a 3 tons Opel Blitz , only the rear-end seems to be made longer . Could be civy used or a fire truck .
Where there any other parts to identify the vehicle dug up ?
Regards Hans .
|
|
|
Post by Hans on Jun 8, 2010 21:42:12 GMT 1
Hi ,
Good to hear its safe !!
The symbol looks like a key doesn't it ? Only , the well known marking with the key in it ( Josef Dietrich's Leibstandarte XX Infantry Regiment ) has the key the other way arround in the shield .
Hans
|
|
|
Post by Hans on Jun 8, 2010 7:15:41 GMT 1
Hello www,
amazing find !! and that it's still there .
The 13b is in a lot of parts different from the 20b , the engine is different , the frame is narrowed.
Think it will not be there long now because its on the net , know there are a few people looking for parts for a 13b !!
Hans.
|
|
|
Post by Hans on Apr 26, 2010 17:06:18 GMT 1
Meeting and market ( on both days , instead off sunday what the flyer says). Attended by several German vehicles . Hans.
|
|
|
Post by Hans on Mar 30, 2010 22:08:37 GMT 1
Hi Loica ,
well, the weight of the present day girls will be a bit more , so i will have to be satisfied with a few less !! ;D
Rather have a militairy vehicle to play with than a slick cabrio to attract the girly's !! Besides , haven't got grey hair yet !!
Anyhowe , it will not be finished for a few years !!
Hans.
|
|
|
Post by Hans on Mar 30, 2010 22:00:19 GMT 1
hello,
who can help me with a pair of driveshafts for the frontaxle of a Phaenomen Granit 1500 4x4 ? Other Phaenomen parts are of interest too !
Thanks , Hans .
|
|
|
Post by Hans on Mar 23, 2010 19:55:27 GMT 1
Thats why i wanted a Heavy Horch , its a real chick-magnet !!! ;D If there is anyone having parts of these vehicles , let me know please!! Hans
|
|
|
Post by Hans on Jan 26, 2010 23:33:15 GMT 1
got these parts from a friend recently , we where both puzzled about what it was . Any ideas ? Thanks , Hans .
|
|
|
Post by Hans on Jan 3, 2010 22:19:41 GMT 1
Hans Erik , oops, saw my mistake !! You have a different vehicle . But , is it still not finished ?? ;D kjettingmannen never knew Nowack in Bautzen made bodies , they are very well known for the Jerrycans they made !! According to the info i found on the net , Nowack exclusively build bodies for Phaenomen until 1945. Truck and carbodies . Later it was sucked in the VEB-Robur company. Should have know that as Phaenomen owner Altough the body of my Phaenomen comes from Drauz Heilbronn !! Hans
|
|