|
Post by nick on Sept 9, 2008 11:30:23 GMT 1
|
|
|
Post by nick on Aug 22, 2008 19:22:52 GMT 1
Hi! I can only say - Congratulations!
I have seen many Type 82:s over the years, but this one are in extremely good condition, and the modifications made after the war seems to be minor so I hope you make a careful restoration. If you need any information or parts you are welcome to contact me - just send me a PM.
Regards / Nick...
|
|
|
Post by nick on Aug 20, 2008 20:27:53 GMT 1
Hi!
For many years it have been "better cond. than when it left the factory" restorations, but I can see that some people are trying to keep as much as possible in original condition instead nowadays. Personally I think it is nice to restore vehicles to a "field condition" with some patina left! But I think you are right about all the reproparts, sometimes it is hard to tell the difference, and if we wait 30 more years it will be impossible to say if a part is original or not. I quote (with sorrow) a Niel Young song - "Rust never sleeps".
Regards / Nick...
|
|
|
Post by nick on Jun 17, 2008 19:58:06 GMT 1
Hello Wille! Yes - this is 100% from a Ford V 3000/S or Maultier. Here is a pic from my original sparepart catalogue. Kindest regards / Nick...
|
|
|
Post by nick on Jun 17, 2008 18:36:52 GMT 1
Hi Guys!
Yes I am back from the filmproduction... I spoke to my friend today and all welding and grinding is done! Now they are going to be sandblasted and primed, and after that we have to mount the rivets and do the final paintjob. Still looking for the right rivets for the kanvas! I will come back to you with pics (and price) when they are ready!
Kindest regards / Nick...
|
|
|
Post by nick on Jun 13, 2008 20:48:07 GMT 1
Was told this is a part from Horch - but I have not been able to identify it - can anyone help me with information? Regards / Nick...
|
|
|
Post by nick on Jun 8, 2008 23:35:26 GMT 1
I am looking for any parts for Mittlerer Horch, Stutzachse and Type 40. All type of details, doors, rims, instruments, seats, bodyparts are interesting. I dont mind rust - as long as you can use parts for mesuring! If anyone got some spares please leave a message under PM.
Kindest regards / Nick...
|
|
|
Post by nick on Jun 1, 2008 21:51:54 GMT 1
Ran in to some major problems with the brake wiring. I only had one original hub (to the right on the lower pic) but my dear friend and neighbour Kenneth Lindsjö, helped me out and manufactured four exact replicas for me - so now the restoration can continue! /Nick...
|
|
|
Post by nick on May 29, 2008 20:20:30 GMT 1
Hi guys! I have made this flat type (copied after an original) and if there is interest out there I can make a limited edition of this (and the rear one as well). The lower pic shows an original rear Lkw plate that I have restored, and I am thinking of making a small edition of this as well! This one is pressed sheetmetal, so I have to make a special tool to make them. Greetings / Nick...
|
|
|
Post by nick on May 29, 2008 17:11:53 GMT 1
Hi Rolf!
I am making repro licence plates for MC, Lkw and other german vehicles - complete with the german stamp!
Regards / Nick...
|
|
|
Post by nick on May 27, 2008 18:24:48 GMT 1
For sale. Lasercut Notek bracket for Ford V 3000S / Maultier / and other Wehrmacht LKW:s. Exact repro made after an original, sandblasted and primed. Price 60€ + shipping. If interested, contact me via personal message! Regards / Nick...
|
|
|
Post by nick on Apr 10, 2008 16:42:50 GMT 1
Hi all! Found this locker in nice original paint and camo (sand/luftwaffe graublau) and I am going to use it for comparing, when painting vehicles. But to what vehicle/trailer does it belong? The plate inside : Rot 8,8 cm Flak 18 oder 36 Blau 10,5 Flak 38 Grün Gerät 40 Regards / Nick...
|
|
|
Post by nick on Mar 1, 2008 9:47:50 GMT 1
Hi Robert!
I might have something for trade, that depends on what Stoewer parts you have in exchange. You find my mail in the member register - send me some pics of what you have got, and a list of what you are looking for!
Regards / Nick...
|
|
|
Post by nick on Feb 29, 2008 23:15:17 GMT 1
Hi again!
Yes - I was wrong! I recognized a part from this, that I got with a lot of Horch parts, and jumped to conclusions - sorry! An expert told me this verdeckgestänge is from a Reichswehrkübel.
Regards / Nick...
|
|
|
Post by nick on Feb 29, 2008 10:59:23 GMT 1
Hi Holger!
My guess is mittlerer Horch, I have just studied the brackets and they look like a match!
Regards / Nick...
|
|