|
Post by mvnut on Oct 15, 2010 5:05:09 GMT 1
Hi Guys, I have several piles of junk that could be made into a early Opel 1.5ton. we are bolting the drive train together but we are missing the correct bearing for the driveshaft hanger that bolts to the chassis behind the gearbox. the postwar parts book does not give a size. can anyone help with a part or a source for the correct bearing?
the housing suggests 64mm OD the shaft 30MM but we are unsure if the width.
cheers MVNUT
|
|
|
Post by mvnut on Nov 4, 2010 0:42:27 GMT 1
hi guys, thanks for all the assistance on the bearing issue. turns out I had a mint original one in a box to look at. the bearing pushes into a rubber sleeve then the sub assembly pushes into the outer housing. very weird.
If there are any loose 1.5ton parts out there id be interested. thanks tony nz
|
|